Face Recognition Payment Terminal, WF-P7601, AndroidSBC, Paris

TL;DR: Face Recognition Payment Terminal

AndroidSBC field desk: POS rollout map updated across supermarkets, restaurants, hotels and fuel forecourts serving Paris, France. The WF-P7601 POS Android motherboard spans the AI face payment POS terminal with 3D camera input and eleven sister models in the WF-P series, all built on the RK3576 octa-core ARM Cortex-A72 2.2GHz plus Cortex-A53 64-bit SoC with the ARM Mali-G52 MC3 GPU, MIPI DSI plus HDMI output at 1080p, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Paris and France importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.

About AndroidSBC and the POS Android Motherboard Family

AndroidSBC is the export arm of Wanlin Manufacturing Group, and it builds the twelve-model WF-P POS Android motherboard family at the Longgang source factory in Shenzhen. The line spans entry single-screen counters through AI face payment terminals and industrial outdoor payment cabinets, so a Paris integrator can qualify one board family and then move between tiers without re-writing the peripheral layer or re-cutting the enclosure. The AndroidSBC engineering desk keeps a reference image per silicon tier, so a France partner developing against the RK3576 board is testing against the same build that ships in volume, not a one-off sample image.

WF-P7601 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P7601 (AI face payment POS terminal with 3D camera input) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For France importers sourcing the WF-P family, the WF-P7601-A variant is the typical configuration for the face payment counter deployment use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing POS Android Motherboards for France Buyers

The thermal problem is underrated. A sealed all-in-one terminal with no fan has to hold a 7x24 counter duty cycle in a France summer, and boards that pass a bench test at 25C start throttling behind a shop window.

The thermal question is handled at the board level rather than in the enclosure. The WF-P tier chosen for Paris is specified for fanless 7x24 counter duty with a hardware watchdog and a scheduled power cycle, and the burn-in record that accompanies the lot is run at the top of the temperature window rather than at 25C. On September 23, 2026 the Paris programme moved from pilot to volume: 158000 boards released against the frame agreement, shipped on the Marseille - Shanghai lane with one frozen BOM across the whole quantity.

Competitive Comparison: WF-P7601 vs Competing POS Android Boards

For Paris integrators the decision usually comes down to whether the vendor can hold a BOM, ship a driver set, and produce a test record - the four points below.

• Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
• Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.

Global POS Terminal and Smart Checkout Market Trends

AI is entering the lane for unglamorous reasons. Product recognition at an unattended counter, face payment at a convenience chain, and basket analytics at a supermarket all need an NPU on the board, and the AI face payment POS terminal with 3D camera input tier carries one rather than pushing the load onto the CPU.

• Entry counter tier: WF-P7601 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
• Dual-screen mainstream tier: WF-P3399 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
• AI and unattended tier: WF-P1330 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.

Growth in France is concentrated in the formats the WF-P family was built for: convenience, quick service, supermarket checkout and unattended payment.

Partner Success Story: Levant Checkout Services (forecourt payment integrator)

A Levant Checkout Services rollout in the GCC fuel and convenience segment shows how the WF-P POS board family works in practice for Paris integrators. Levant Checkout Services rolled out 158000 WF-P boards across 58 forecourt payment cabinets.

• OEM relationship: AndroidSBC private-label SKU shipped with Levant Checkout Services branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus ANFR conformity, all bundled into the Shenzhen source-factory shipment.

As Levant Checkout Services Project Director for GCC Fuel and Convenience explained: Levant Checkout Services runs unattended forecourt cabinets on the industrial WF-P tier, and 158000 units hold a 24-hour duty cycle across the Paris network.

Field Report: face payment counter deployment across a convenience chain

SHENZHEN, September 23, 2026 - Cong Yu, AndroidSBC field desk. Each WF-P7601 board in the France lot carries a serial number logged against its test record, and the peripheral validation report references those serials. The WF-P7601 POS Android motherboard order for Paris, France cleared the burn-in station on schedule and is en route via the Marseille - Shanghai lane.

The WF-P7601 AI face payment POS terminal with 3D camera input production lot includes the WF-P7601-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For France integrators, the ANFR conformity plus CE marking with ANFR radio interface registration paperwork is bundled.

Filed by Cong Yu, AndroidSBC field desk, SHENZHEN. French chains ask for the NF525 fiscal certification trail and French receipt wording, and they audit the log retention behaviour during the pilot.

WF-P7601 Application Scenarios

The WF-P7601 AI face payment POS terminal with 3D camera input sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P7601-A configuration is the typical build for the face payment counter deployment use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.

• Supermarket and hypermarket checkout: the WF-P7601 drives the cashier screen while the second lane carries the customer display or the promotion wall in Paris.
• Convenience and small format stores: the WF-P3288 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
• Restaurants and quick service: the WF-P3399 runs the order screen plus a kitchen display output, with the customer display showing the order total.
• Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
• Unattended retail and vending: the WF-P1330 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
• Fuel forecourts and parking: the WF-P6180 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
• Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
• AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
• Retrofit programmes in Paris: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.

Partnership Models for Paris Buyers

Three tracks exist because Paris partners arrive from three directions: as a distributor with stock, as an integrator with a customer, or as a brand owner with a label.

• Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

Whether France partners take distribution, integration or private label, the WF-P board underneath carries the same serialised test record.

Frequently Asked Questions

Does the WF-P POS Android motherboard family support an AI face payment POS terminal with 3D camera input?

Answer: Yes. The AI face payment POS terminal with 3D camera input is a stock configuration on the WF-P POS Android motherboard family from AndroidSBC. All tiers are validated against the same firmware build and the same peripheral interface before shipment to Paris.

Which silicon tiers are available in the WF-P family for France buyers?

Answer: RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527 are all in production. The RK3576 tier specified here is validated for France compliance with the same evidence pack as the rest.

Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?

Answer: Yes, and the configuration is documented per lot. The Paris partner receives the interface map and the validation report with the shipment, so the counter can be wired without trial and error.

What is the minimum order quantity and the sample lead time for France?

Answer: The sample MOQ is one unit with a 1-3 day lead. For volume, Paris partners work against a published price list with a 15-30 day production lead, and the BOM is frozen per lot.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Available on all three tracks. AndroidSBC does AOSP builds, BSP porting, custom boot animation, custom logo and pre-installed apps, with the result held as the Paris partner reference image.

How are firmware updates delivered to a France estate after deployment?

Answer: Updates go out through the staged OTA channel bundled with the driver SDK. The Paris partner can hold lanes, pilot on ten, and revert any wave that misbehaves.

What shipping terms does AndroidSBC support for France orders?

Answer: All three standard terms are available - FOB Shenzhen, CIF to the destination port, or EXW for partners with their own consolidator. Export customs clearance is handled by AndroidSBC.

What happens if a board fails in the field in France?

Answer: AndroidSBC holds service stock for Paris partners on a frame agreement, so a failed board is replaced from that stock while the root-cause analysis runs in parallel.

Contact AndroidSBC: Start Your WF-P7601 Sourcing Conversation

To start a WF-P POS Android motherboard sourcing conversation with AndroidSBC, Paris integrators can reach the export desk through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Paris and France buyers the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.