CCD Scanner Payment Terminal Board with 8-Inch Display, WF-SPT-04, AndroidSBC, Paris

TL;DR: CCD Scanner Payment Terminal Board with 8-Inch Display

AndroidSBC field deployment report from active smart payment terminal projects serving Paris, France. The WF-SPT-04 smart payment terminal Android motherboard covers the face recognition payment terminal build and eleven sister configurations in the WF-SPT series, spanning the RK3576 quad-core ARM Cortex-A72 2.2GHz plus quad-core ARM Cortex-A53 1.8GHz SoC with the ARM Mali-G52 MC3 GPU, 8-inch 1280x800 eDP main panel plus 3.5-inch customer screen, and Android 14 with AOSP baseline and optional GMS firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to Paris and France importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.

About AndroidSBC and the Smart Payment Terminal Android Motherboard Family

AndroidSBC, the export arm of Wanlin Manufacturing Group, treats the WF-SPT family as a long-lived platform rather than a one-off design. For Paris and France partners that means the same connector map, the same printer pinout and the same firmware window across every configuration in the range. Every configuration ships with the same Android build, the same peripheral contract and the same test report format, so a Paris quality team that has signed off one WF-SPT board can read the next one without a new learning curve.

WF-SPT-04 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-04 (face recognition payment terminal build) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For France importers sourcing the WF-SPT family, the WF-SPT-04-A variant is the typical configuration for the chain pharmacy and supermarket face payment lanes use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Payment Terminal Android Motherboards for France Buyers

Most Paris programmes are multi-format from the start: one countertop build for staffed lanes, one unattended build for kiosks, one outdoor build for forecourts. Buying those from three suppliers means three Android baselines and three sets of spare parts.

Logistics is the third problem. A board that clears Port of Marseille without a matching test report, a signed firmware image and a packing list keyed to the configuration code will sit in a warehouse while the Paris rollout window closes. AndroidSBC plans the Paris rollout around the Marseille - Shanghai lane and a 3rd release slot, so the 114200 board sample lot and the volume order ride the same documentation set rather than two different ones.

Competitive Comparison: WF-SPT-04 vs Competing Smart Payment Terminal Motherboards

For Paris buyers the honest comparison is total cost of integration, not unit price. A cheaper board without a printer profile, a scan mapping or an OTA path costs more by the time the estate is live in France.

• vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
• vs single-configuration boards: twelve configurations share one peripheral contract, so a Paris buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
• vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the France integrator to manage it.
• vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in Paris is the board that ships in volume.

Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends

Demand in France is moving toward unattended and self-service formats, and that shift changes what an face recognition payment terminal build has to prove: an offline transaction buffer, a watchdog that recovers without a human, and a printer that survives a roll of receipts per day in Paris.

• Countertop tier: WF-SPT-01 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
• Unattended tier: WF-SPT-09 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
• Flagship tier: WF-SPT-04 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.

For Paris buyers the reading is straightforward: the growth is in formats, not in replacements, so the board that wins is the one that can be qualified once and then repeated across a France estate.

Partner Success Story: Nordweg Handel Systemer (grocery chain checkout integrator)

The Nordic grocery retail team at Nordweg Handel Systemer wrote the specification themselves: one Android baseline, one printer pinout, one compliance file for Paris. Nordweg Handel Systemer deployed 114200 WF-SPT boards across 140 grocery stores.

• OEM relationship: AndroidSBC private-label SKU shipped with Nordweg Handel Systemer branding and CE / FCC / RoHS files bundled.
• Silicon choice: Rockchip RK3568, RK3566, RK3576, RK3288 and RK3399 plus Allwinner A133, A64, H618 and T527 across twelve configurations, one fixed bill of materials per production lot.
• Payment peripheral package: bundled into the source-factory shipment, covering NFC contactless, IC card, magnetic stripe, thermal printer control, 1D and 2D scan engine, signature capture and the LTE modem band list.
• Unattended-operation tools: hardware watchdog, RTC, auto power-on after mains return, scheduled power cycling, kiosk-mode lockdown, offline transaction buffer and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus ANFR conformity, all bundled into the Shenzhen source-factory shipment.

Nordweg Handel Systemer Technical Director for Nordic Grocery Retail puts it plainly: "Nordweg Handel Systemer picked the smart payment terminal board because the printer holds up across a full shift in a cold store, and 114200 boards went into the Paris grocery group without a driver change."

Field Report: face payment rollout at a national pharmacy chain

BAOLONG, September 30, 2026 - Liang Shu, AndroidSBC field desk. The face recognition payment terminal build on the WF-SPT-04 board was qualified with the customer screen attached, and the France quality team signed the report against the configuration code rather than the model name. The WF-SPT-04 payment terminal board order for Paris, France cleared the burn-in station on schedule and is en route via the Marseille - Shanghai lane.

The WF-SPT-04 face recognition payment terminal build production lot includes the WF-SPT-04-A variant as the typical configuration, with printer current profile, scan engine mapping and staged OTA management bundled into the source-factory shipment. For France integrators, the ANFR conformity plus CE marking with ANFR radio interface registration paperwork is bundled.

Filed by Liang Shu, AndroidSBC field desk, BAOLONG. French retail groups specify the receipt layout early, because the printer control header has to match the fiscal wording used at the till.

WF-SPT-04 Application Scenarios

The WF-SPT-04 face recognition payment terminal build sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-04-A configuration is the typical build for the chain pharmacy and supermarket face payment lanes use case, with printer current profile, scan engine mapping and staged OTA management bundled.

• Convenience and grocery counters: the WF-SPT-07 takes contactless, IC card and QR at the till and prints the receipt in one pass.
• Restaurant and quick-service counters: the WF-SPT-04 runs order entry, payment and kitchen ticket printing on the same board.
• Unattended vending and lockers: the WF-SPT-08 pairs the modem with the printer header and the watchdog for sites with no staff present.
• EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
• Transit gates and event entry: the WF-SPT-03 takes contactless payment and prints the entry ticket without a fixed counter.
• Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
• Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
• Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
• Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.

Partnership Models for Paris Buyers

The Paris decision is usually commercial rather than technical - whether the partner wants inventory risk, integration depth or brand ownership in France.

• Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.

The France partner that starts on the distribution track and moves to private label does not re-qualify the board, which is the point of holding one peripheral contract across the family.

Frequently Asked Questions

Does the smart payment terminal board family support a face recognition payment terminal build?

Answer: Yes. The face recognition payment terminal build is one of the twelve held configurations, which means the bill of materials is frozen for the length of the agreement rather than re-spun between lots in Paris.

Which configurations are available in the WF-SPT family for France buyers?

Answer: AndroidSBC ships twelve configurations including the RK3576 board: value desktop, 4G unattended, face recognition, dual-screen, kiosk, legacy Android 11, portable 4G, outdoor, hospitality, multimedia and legacy Linux builds.

Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?

Answer: Yes. AndroidSBC validates the panel, the printer and the scan engine together rather than separately, because the combined current draw is what decides whether a terminal survives a shift in France.

What payment scheme certification support does AndroidSBC provide for France?

Answer: AndroidSBC prepares CE marking with ANFR radio interface registration documentation and ANFR conformity files alongside the production order, so the Paris acquiring partner receives a file that names the parts on the pallet.

What is the minimum order quantity and the sample lead time for France?

Answer: For Paris programmes the practical answer is a sample lot first, a joint qualification run second, and a production slot third, with the compliance file issued at the sample stage.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. Boot logo, custom launcher, kiosk mode and pre-installed applications are all available, delivered as a signed image with a staged OTA plan for the Paris estate.

How are firmware updates delivered to a France device estate after deployment?

Answer: Updates are signed, staged and reversible. The Paris integrator chooses the group size, and a failed update returns the terminal to the previous image without a site visit.

What shipping terms does AndroidSBC support for France orders?

Answer: Terms are agreed per programme: FOB Shenzhen for stock configurations, CIF Port of Marseille for volume lots, and DAP where the Paris partner wants delivery to its own warehouse.

Contact AndroidSBC: Start Your WF-SPT-04 Sourcing Conversation

For Paris buyers the fastest route is a sample lot: specify the format, order the board, qualify it on the bench, then move to a production slot with the compliance file already prepared.

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Paris and France buyers the offer is a source-factory relationship: twelve configurations, one peripheral contract, a frozen bill of materials and a compliance file that ships with the pallet rather than after it.