Scheduled Power On/off, WF-X9-02, AndroidSBC, Paris

TL;DR: Scheduled Power On/off

AndroidSBC field desk: signage rollout map updated across retail, transport, hospitality and public venues serving Paris, France. The WF-X9-02 X9 Android motherboard spans the dual LVDS commercial display with extended output and eleven sister configurations in the X9 series, all built on the A133 quad-core ARM Cortex-A53 1.6GHz SoC with the PowerVR GE8300 GPU, dual LVDS output at 50Hz or 60Hz, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the X9 family from the Longgang source factory in Shenzhen to Paris and France importers who run advertising players, digital signage networks, self-service query terminals, smart retail terminals, parcel lockers and access control panels.

About AndroidSBC and the X9 Android Motherboard Family

AndroidSBC is the export arm of Wanlin Manufacturing Group, and it builds the twelve-configuration X9 Android motherboard family at the Longgang source factory in Shenzhen. Every configuration runs the same Allwinner A133 quad-core Cortex-A53 platform on Android 10, so a Paris integrator can qualify one board family and then move between memory, storage, display and interface options without re-writing the application layer or re-cutting the enclosure. The AndroidSBC engineering desk keeps one reference image for the whole X9 line, so a France partner developing against the board is testing against the same Android 10 build that ships in volume, not a one-off sample image.

WF-X9-02 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-X9-02 (dual LVDS commercial display with extended output) holds its LVDS or MIPI panel drive plus touch sampling while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For France importers sourcing the X9 family, the WF-X9-02-A variant is the typical configuration for the shopfront dual-screen display wall use case, on a 120x75mm six-layer board with four 3mm mounting holes and a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing X9 Android Motherboards for France Buyers

The storage question is underrated. Boards built on raw NAND instead of onboard eMMC lose content and configuration after a year of unattended power cycles, and a France estate of several hundred screens then has to be visited by hand.

The thermal question is handled at the board level rather than in the enclosure. The X9 tier chosen for Paris is specified for fanless 7x24 duty across -20C to 70C with a hardware watchdog and a scheduled power cycle, and the burn-in record is run at the top of the temperature window rather than at 25C. On September 24, 2026 the Paris programme moved from pilot to volume: 145400 boards released against the frame agreement, shipped on the Marseille - Shanghai lane with one frozen bill of materials across the whole quantity.

Competitive Comparison: WF-X9-02 vs Competing Commercial Display Android Boards

For Paris integrators the decision usually comes down to whether the vendor can document a jumper map, ship a touch configuration, and produce a test record - the four points below.

• Panel and touch readiness: single or dual LVDS plus MIPI DSI at 30 or 40 pins, with infrared, optical, capacitive and resistive panels enumerating as HID devices, so Paris integrators mount a locally sourced screen without a calibration pass.
• Bundled integration: panel jumper map, pin-one orientation note, touch HID configuration, playback modes and the peripheral driver set ship in the carton; competing display boards sold to Paris usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the Paris integrator to obtain.
• Long-term supply: onboard eMMC in 8GB, 16GB or 32GB, one fixed bill of materials per production lot and a seven-year firmware window, against the frequent component swaps seen on competing boards reaching Paris.

Global Digital Signage and Commercial Display Market Trends

Connectivity is entering the brief for unglamorous reasons. Remote proof-of-play reporting, scheduled content and remote recovery all need a network path and a clean update channel on the board, and the dual LVDS commercial display with extended output tier carries those rather than pushing the load onto a separate box.

• Entry playback tier: WF-X9-02 covers loop, scheduled and interrupt playback on a single LVDS panel, which is the configuration most small signage networks standardise on.
• Interactive mainstream tier: WF-X9-09 pairs an LVDS or MIPI panel with infrared or capacitive touch for query, wayfinding and self-service kiosks.
• Connected and unattended tier: WF-X9-10 adds the 4G path, the -20C to 70C window and the watchdog behaviour that outdoor cabinets and parcel lockers require.

Growth in France is concentrated in the formats the X9 family was built for: retail media, transport hubs, quick service screens, parcel lockers and unattended self-service.

Partner Success Story: Levant Screen Services (outdoor digital out of home integrator)

A Levant Screen Services rollout in the GCC outdoor advertising segment shows how the X9 board family works in practice for Paris integrators. Levant Screen Services rolled out 145400 X9 boards across 58 outdoor advertising cabinets.

• OEM relationship: AndroidSBC private-label SKU shipped with Levant Screen Services branding and CE / FCC / RoHS files bundled.
• Silicon lock: Allwinner A133 quad-core ARM Cortex-A53 1.6GHz with the PowerVR GE8300 GPU on every configuration, one fixed bill of materials per production lot.
• Peripheral driver package: bundled into the source-factory shipment, covering LVDS and MIPI panel drive, infrared, optical, capacitive and resistive touch, thermal printer, QR scanner, barcode scanner, NFC reader, RFID reader, ID card reader, fingerprint reader, camera and lock driver board.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus ANFR conformity, all bundled into the Shenzhen source-factory shipment.

As Levant Screen Services Project Director for GCC Outdoor Advertising explained: Levant Screen Services runs unattended street cabinets on the wide-temperature X9 tier, and 145400 units hold a 24-hour duty cycle across the Paris network.

Field Report: shopfront dual-screen display wall installation

BAOLONG, September 24, 2026 - Liang Shu, AndroidSBC field desk. Each WF-X9-02 board in the France lot carries a serial number logged against its test record, and the panel validation report references those serials. The WF-X9-02 X9 Android motherboard order for Paris, France cleared the burn-in station on schedule and is en route via the Marseille - Shanghai lane.

The WF-X9-02 dual LVDS commercial display with extended output production lot includes the WF-X9-02-A variant as the typical configuration, with LVDS or MIPI panel driver, touch HID configuration and staged OTA management bundled into the source-factory shipment. For France integrators, the ANFR conformity plus CE marking with ANFR radio interface registration paperwork is bundled.

Filed by Liang Shu, AndroidSBC field desk, BAOLONG. French retail media buyers ask for French typography and check the standby power figure against the building energy disclosure rules.

WF-X9-02 Application Scenarios

The WF-X9-02 dual LVDS commercial display with extended output sits inside a twelve-configuration X9 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-X9-02-A configuration is the typical build for the shopfront dual-screen display wall use case, with panel driver, touch HID configuration and staged OTA management bundled.

• Advertising machine and digital signage: the WF-X9-02 runs loop, scheduled and interrupt playback on an LVDS panel in shop windows and store aisles.
• Interactive query and wayfinding: the WF-X9-08 pairs a MIPI or LVDS panel with infrared or capacitive touch for lobby and hospital directories.
• Smart retail terminal and vending: the WF-X9-09 carries the scanner, the printer and the payment peripheral on one board in a compact enclosure.
• Parcel locker and fresh food cabinet: the WF-X9-10 drives the screen and the lock driver board from the two serial lanes, with the watchdog holding a 7x24 duty cycle.
• Face recognition access control: the WF-X9-11 takes the camera input and the door controller wiring on the same board.
• Conference tablet and teaching all-in-one: LVDS or MIPI panel drive with HID touch and the industry publishing software already validated.
• Industrial HMI and IoT gateway: headless or panel configurations on the same bill of materials, with GPIO, I2C, SPI, PWM and ADC available for field wiring.
• Hotel, building and campus information publishing: scheduled power cycling plus remote content push across a mixed estate of screens.
• Retrofit programmes in Paris: the same 120x75mm board re-uses the existing enclosure, panel and mounting pattern, so an installed estate can be upgraded screen by screen.

Partnership Models for Paris Buyers

Three tracks exist because Paris partners arrive from three directions: as a distributor with stock, as an integrator with a customer, or as a brand owner with a label.

• Distribution track: the partner buys the X9 board against a published price list, keeps its own stock, and AndroidSBC supplies the panel files, the touch configuration and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, mounting drawings and panel validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the X9 board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed bill of materials held for the length of the agreement.

Whether France partners take distribution, integration or private label, the X9 board underneath carries the same serialised test record.

Frequently Asked Questions

Does the X9 Android motherboard family support a dual LVDS commercial display with extended output?

Answer: Yes. The dual LVDS commercial display with extended output is a stock configuration on the X9 Android motherboard family from AndroidSBC. All twelve configurations are validated against the same Android 10 build and the same panel interface before shipment to Paris.

Which configurations are available in the X9 family for France buyers?

Answer: Every X9 configuration uses the same Allwinner A133 silicon and the same Android 10 build. Panel interface, touch type, storage size and the network option are the four axes a France buyer specifies against.

Can one X9 board drive an LVDS or MIPI panel plus infrared, capacitive or resistive touch?

Answer: Yes, and the configuration is documented per lot. The Paris partner receives the jumper map, the pin-one orientation note and the validation report with the shipment, so the screen can be wired without trial and error.

What is the minimum order quantity and the sample lead time for France?

Answer: The sample MOQ is one unit with a 1-3 day lead. For volume, Paris partners work against a published price list with a 15-30 day production lead, and the bill of materials is frozen per lot.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Available on all three tracks. AndroidSBC does AOSP builds, BSP porting, custom boot animation, custom logo and pre-installed apps, with the result held as the Paris partner reference image.

How are firmware updates delivered to a France screen estate after deployment?

Answer: Updates go out through the staged OTA channel bundled with the driver package. The Paris partner can hold screens, pilot on ten, and revert any wave that misbehaves.

What shipping terms does AndroidSBC support for France orders?

Answer: All three standard terms are available - FOB Shenzhen, CIF to the destination port, or EXW for partners with their own consolidator. Export customs clearance is handled by AndroidSBC.

What happens if a board fails in the field in France?

Answer: AndroidSBC holds service stock for Paris partners on a frame agreement, so a failed board is replaced from that stock while the root-cause analysis runs in parallel.

Contact AndroidSBC: Start Your WF-X9-02 Sourcing Conversation

To start an X9 Android motherboard sourcing conversation with AndroidSBC, Paris integrators can reach the export desk through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Paris and France buyers the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.