Main Screen + Customer Screen Payment Terminal with BSP Source, WF-SPT-06, AndroidSBC, Paris

TL;DR: Main Screen + Customer Screen Payment Terminal with BSP Source

AndroidSBC OEM partnership announcement extending smart payment terminal board availability serving Paris, France. The WF-SPT-06 smart payment terminal Android motherboard covers the kiosk payment terminal build with large touch panel and eleven sister configurations in the WF-SPT series, spanning the RK3399 dual-core ARM Cortex-A72 2.0GHz plus quad-core ARM Cortex-A53 1.5GHz SoC with the ARM Mali-T860 MP4 GPU, 8-inch 1920x1080 eDP capacitive touch panel, and Android 12 with AOSP baseline and optional GMS firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to Paris and France importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.

About AndroidSBC and the Smart Payment Terminal Android Motherboard Family

The WF-SPT line exists because payment hardware buyers in France rarely want a new board design - they want the same board with a different modem, a different panel and a different certification file. AndroidSBC holds those variables inside one family, and the Paris buyer picks the configuration rather than commissioning a new PCB. AndroidSBC holds a fixed bill of materials per production lot, which is the part Paris buyers care about most: the board that passed qualification is the board that arrives in volume, twelve months later, on the same peripheral contract.

WF-SPT-06 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-06 (kiosk payment terminal build with large touch panel) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For France importers sourcing the WF-SPT family, the WF-SPT-06-A variant is the typical configuration for the quick service restaurant self-ordering kiosks use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Payment Terminal Android Motherboards for France Buyers

France integrators are usually carrying an installed estate when they come to AndroidSBC. The new board has to live next to older terminals, older peripherals and older middleware, which puts the serial port, the RS485 lane and the legacy boot path back on the specification sheet.

Logistics is the third problem. A board that clears Port of Marseille without a matching test report, a signed firmware image and a packing list keyed to the configuration code will sit in a warehouse while the Paris rollout window closes. For the Paris buyer the test is simple - order 61700 boards as a sample lot, run them against the printer, the reader and the scan engine the project actually uses, and check whether the delivery file matches the pallet. AndroidSBC ships 61700 boards on the Marseille - Shanghai lane with the paperwork already attached.

Competitive Comparison: WF-SPT-06 vs Competing Smart Payment Terminal Motherboards

The comparison that matters for France buyers is not chip against chip. It is whether the board arrives with a validated peripheral stack, a signed firmware image and a compliance file that names the parts on the pallet - which is where most competing smart payment terminal boards fall short.

• vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
• vs single-configuration boards: twelve configurations share one peripheral contract, so a Paris buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
• vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the France integrator to manage it.
• vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in Paris is the board that ships in volume.

Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends

The kiosk payment terminal build with large touch panel is being pulled into programmes that did not exist five years ago - EV charging, parcel lockers, stadium ticketing, self-checkout - and each one arrives in France with its own certification calendar and its own Paris install window.

• Countertop tier: WF-SPT-02 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
• Unattended tier: WF-SPT-08 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
• Flagship tier: WF-SPT-04 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.

For Paris the practical conclusion is that a terminal programme is a documentation programme. Growth is available to anyone; margin is available to the integrator whose board supplier ships the file with the pallet in France.

Partner Success Story: Nordweg Handel Systemer (grocery chain checkout integrator)

Nordweg Handel Systemer runs its Nordic grocery retail business on tight install windows, so the board supplier was chosen on delivery reliability as much as on specification. Nordweg Handel Systemer deployed 61700 WF-SPT boards across 140 grocery stores.

• OEM relationship: AndroidSBC private-label SKU shipped with Nordweg Handel Systemer branding and CE / FCC / RoHS files bundled.
• Silicon choice: Rockchip RK3568, RK3566, RK3576, RK3288 and RK3399 plus Allwinner A133, A64, H618 and T527 across twelve configurations, one fixed bill of materials per production lot.
• Payment peripheral package: bundled into the source-factory shipment, covering NFC contactless, IC card, magnetic stripe, thermal printer control, 1D and 2D scan engine, signature capture and the LTE modem band list.
• Unattended-operation tools: hardware watchdog, RTC, auto power-on after mains return, scheduled power cycling, kiosk-mode lockdown, offline transaction buffer and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus ANFR conformity, all bundled into the Shenzhen source-factory shipment.

Nordweg Handel Systemer Technical Director for Nordic Grocery Retail signed the acceptance note with this comment: "Nordweg Handel Systemer picked the smart payment terminal board because the printer holds up across a full shift in a cold store, and 61700 boards went into the Paris grocery group without a driver change."

Field Report: self-ordering kiosk rollout at a quick service restaurant group

PINGHU, September 30, 2026 - Ling Yun, AndroidSBC field desk. Engineering in France closed the WF-SPT-06 lot with a sample pull: three boards opened, the printer header re-flow inspected, the reader antenna re-tuned, and the results written back into the production file. The WF-SPT-06 payment terminal board order for Paris, France cleared the burn-in station on schedule and is en route via the Marseille - Shanghai lane.

The WF-SPT-06 kiosk payment terminal build with large touch panel production lot includes the WF-SPT-06-A variant as the typical configuration, with printer current profile, scan engine mapping and staged OTA management bundled into the source-factory shipment. For France integrators, the ANFR conformity plus CE marking with ANFR radio interface registration paperwork is bundled.

Filed by Ling Yun, AndroidSBC field desk, PINGHU. French retail groups specify the receipt layout early, because the printer control header has to match the fiscal wording used at the till.

WF-SPT-06 Application Scenarios

The WF-SPT-06 kiosk payment terminal build with large touch panel sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-06-A configuration is the typical build for the quick service restaurant self-ordering kiosks use case, with printer current profile, scan engine mapping and staged OTA management bundled.

• Convenience and grocery counters: the WF-SPT-12 takes contactless, IC card and QR at the till and prints the receipt in one pass.
• Restaurant and quick-service counters: the WF-SPT-04 runs order entry, payment and kitchen ticket printing on the same board.
• Unattended vending and lockers: the WF-SPT-03 pairs the modem with the printer header and the watchdog for sites with no staff present.
• EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
• Transit gates and event entry: the WF-SPT-09 takes contactless payment and prints the entry ticket without a fixed counter.
• Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
• Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
• Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
• Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.

Partnership Models for Paris Buyers

Three commercial structures cover almost every France programme AndroidSBC runs, from a distributor buying against a price list to a brand shipping its own label.

• Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.

Every track ends the same way in France: the board arrives with its test report, its certificate set and its signed firmware image, whether or not it carries the partner brand in Paris.

Frequently Asked Questions

Does the smart payment terminal board family support a kiosk payment terminal build with large touch panel?

Answer: Yes. The kiosk payment terminal build with large touch panel is a stock configuration on the smart payment terminal board family from AndroidSBC. All twelve configurations are validated against the same Android build and the same peripheral contract before shipment to France.

Which configurations are available in the WF-SPT family for France buyers?

Answer: The family spans RK3399 plus eleven configurations covering countertop, unattended, outdoor, hospitality and multimedia formats, all documented in one delivery file for Paris.

Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?

Answer: Yes. The board is specified for concurrent panel, printer and scan operation, with the peripheral contract documented so a Paris integrator can swap mechanisms without a board change.

What payment scheme certification support does AndroidSBC provide for France?

Answer: AndroidSBC ships the CE / FCC / RoHS set plus ANFR conformity with every lot, and supports CE marking with ANFR radio interface registration testing for the France configuration through the qualification run at the factory.

What is the minimum order quantity and the sample lead time for France?

Answer: AndroidSBC quotes samples from one unit with a 1-3 day lead time, holds the configuration for the length of the agreement, and publishes volume tiers from 500 boards for France programmes.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. Custom ROM, boot logo and pre-install work is scoped as an engineering item and delivered with the board, so the France integrator receives a terminal that boots into its own application.

How are firmware updates delivered to a France device estate after deployment?

Answer: The firmware window is published with the configuration: signed images, staged groups, rollback and a maintenance schedule, all documented for the France operations team.

What shipping terms does AndroidSBC support for France orders?

Answer: Shipments to France clear through Port of Marseille on a weekly lane, with the packing list keyed to the configuration code and the certificate set inside the same carton.

Contact AndroidSBC: Start Your WF-SPT-06 Sourcing Conversation

Partners in Paris can start with a single sample configuration or with a full estate specification - both routes end at the same production slot and the same compliance file.

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

The Longgang source factory holds capacity at 5000 boards per week for France programmes. Paris partners get a frozen bill of materials, a published price list and a compliance file matched to every lot.